www.furuno.com
ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
MARINE RADAR
Model
FAR-2218(-BB)/2228(-BB)/2318/2328/
FAR-2238S(-BB/-NXT/-NXT-BB)/
FAR-2338S(-NXT)/2328W/2338SW
SAFETY INSTRUCTIONS ........................i
SYSTEM CONFIGURATION ..................iii
EQUIPMENT LISTS................................ix
1. INSTALLATION...............................1-1
1.1 Antenna Unit (X-band Radar) .............1-1
1.2 Antenna Unit (S-band Radar) .............1-7
1.3 Monitor Unit.......................................1-12
1.4 Control Unit.......................................1-13
1.5 Processor Unit ..................................1-16
1.6 Transceiver Unit................................1-19
1.7 Intelligent Hub (option)......................1-19
1.8 Switching Hub (option)......................1-20
1.9 Junction Box (option) ........................1-21
2. WIRING............................................2-1
2.1 Overview .............................................2-1
2.2 Antenna Unit for X-band,
TR-UP Radar......................................2-4
2.3 Antenna Unit for X-band,
TR-DOWN Radar..............................2-14
2.4 Antenna Unit for S-band,
TR-UP Radar....................................2-20
2.5 Antenna Unit for S-band,
TR-DOWN Radar..............................2-33
2.6 Transceiver Unit................................2-39
2.7 Processor Unit ..................................2-45
2.8 Monitor Unit.......................................2-52
2.9 LAN Signal Converter .......................2-54
2.10 Junction Box (option) ........................2-57
2.11 Intelligent HUB (option).....................2-58
2.12 VDR Connection ...............................2-58
3. ADJUSTMENTS ..............................3-1
3.1
How to Open the Radar Installation Menu
....3-2
3.2 How to Align the Heading ...................3-3
3.3 How to Adjust the Sweep Timing ........3-4
3.4 How to Suppress Main Bang ..............3-4
3.5 Other Settings .....................................3-5
4. INPUT/OUTPUT DATA ...................4-1
4.1 Processor Unit ....................................4-1
4.2 Sub Monitor.........................................4-3
APPENDIX 1 JIS CABLE GUIDE.....AP-1
APPENDIX 2
DIGITAL INTERFACE
....AP-2
PACKING LISTS ................................. A-1
OUTLINE DRAWINGS ........................ D-1
INTERCONNECTION DIAGRAMS ..... S-1
To Next Page
Need help?
General
