Furuno FCV-667 - MENU OPERATION AND SYSTEM SETTINGS; Menu Selection and Navigation

2-10
2.11 Menu Operation
The menu, consisting of the main menu and three system menus, contains less often used
functions which do not require frequent adjustment.
2.11.1 Menu selection
1. Set the [MODE] switch in the MENU position.
M/Z B/L B/Z
0 (-20 - +20)
OFF 1 2 3
NOISE LIMITER
HUE SELECTION
1 (1 - 7)
0 (-20 - +20)
GAIN ADJUST 200KHZ
GAIN ADJUST 50KHZ
CLUTTER LEVEL
0 * (0 - 3)
ZOOM MODE (B. LOCK)
/ : TO SELECT ITEM, 1/2
-/+
: TO SET CONDITION.
* A shown when
auto mode is
active.
2. To go to page 2 of the main menu, select ZOOM MODE (B. LOCK) with [▼] and then press
[▼] again.
VRM WHT
MARKER (VRM)
GO TO SYSTEM MENU
NO YES
/ : TO SELECT ITEM, 2/2
-/+
: TO SET CONDITION.
3. To go to the system menu, press [▼] to select GO TO SYSTEM MENU and [+] to select YES.
You can switch among system menus by selecting MENU and using [+] or [-].