6. MAINTENANCE & TROUBLESHOOTING
6-5
6.4.2 Receiving a test message
When a test call is received, the alarm sounds. If the manual ACK is set, the
following message appears.
Test request
call received.
CANCEL ALARM
FROM : 002444888
SAFETY
KIND : TEST
COMM MODE : NO INFO
ACK REQ
1. Press the CANCEL key to silence the alarm. The following display appears.
** Received Message **
JAN03/06 11:18 ECC : OK
KIND : TEST
TEST CALL
COMM MODE : NO INFO
FROM : 002444888
SAFETY
PRESS ENT TO ACK.
ACK REQ
2. Press the ENT key.
** Send Message **
TEST ACK
COMM MODE : NO INFO
STATION ID : 002444888
ACK
SAFETY
KIND : TEST
PRESS CALL TO SEND
3. Press the CALL key more than three seconds to send the ACK. The screen
returns standby display.
To Next Page
Loading...
