1. OPERATIONAL OVERVIEW
1-14
How to set priority of the remote station
1. Disconnect the plug of a remote station to turn off the remote station.
2. While pressing the MENU key of a remote station, connect the plug to turn on
the power.
Version No.
055021
6-01.XX
Now ID=1
Input
New ID (1-4)=
09/02/09
12:24
3. Press 1, 2, 3, or 4 key on the remote handset as appropriate followed by the
ENT key. Never enter same number among different remote stations.
4. Turn off and on the power of the transceiver unit.
1.5 Adjusting the Contrast
1. Press the MENU key to show the SETUP MENU screen.
2. Rotate the CHANNEL knob to show third page of the SETUP MENU and
select the CONTRAST.
3. Press the ENT key to show the CONTRAST MENU.
4. Press the ENT key again to show the CONTRAST LEVEL SETUP screen.
CONTRAST LEVEL SETUP
LEVEL (0-15)
< >9
EXT: ENT
5. Rotate the CHANNEL knob, or press the ▲ or ▼ key to adjust the
contrast.
6. Press the ENT key.
Note: To restore the default value of the contrast, press the SHIFT key three
seconds at the standby display.
To Next Page
Loading...
