Furuno FM-8800D - Position Call: Other Ship Requests Your Position

3. DSC OPERATION FOR NON-DISTRESS CASES
3-21
3.5.2 Position call: other ship requests your position
1. When a position request call is received, the audio alarm sounds and the
display changes as below.
Position request
call received.
KIND : POSITION REQ
COMM OPTION : NO INFO
ACK REQ
FROM : 123456789
SAFETY
CANCEL ALARM
2. Press the CANCEL key to silence the alarm.
** Received Message **
APR01/04 12 : 34 ECC : OK
POSITION CALL
KIND : POSITION REQ
COMM OPTION : NO INFO
ACK REQ
SAFETY
FROM : 123456789
PRESS ENT TO ACK.
3. To send your position manually, press the ENT key. The following pop-up
menu appears.
ANSWER
NO ANSWER
4. Choose ANSWER by the CH knob and press the ENT key.
5. Press the CALL key more than three seconds to send your position data.
Then, the standby display appears.
To send no position data, choose NO ANSWER and press the ENT key twice
to return to the standby display.