Is the Chart Display set up to meet the minimum requirements of the IMO Standard display
setting?
Attributes Display set to Text Box as recommended?
Boundaries set for Symbolized?
Four Shades selected as recommended?
Full Light Lines displayed?
Shallow Pattern displayed?
Shallow Water Danger selected as recommended?
Highlight Date Dependent as recommended?
Highlight INFO displayed?
Highlight Document displayed?
Contour Labels displayed?
Spot Soundings as recommended?
Submarines Cables and Pipelines displayed?
All Isolated Dangers as recommended displayed?
Magnetic Variation displayed?
Depth Contours displayed?
Natural and Man-made Features displayed?
Important Text displayed?
Light Description displayed?
Nature of Seabed displayed?
Magnetic Variation and Swept Depth displayed?
Height of Islet or Land Feature displayed?
It is cruc
ial for the safety of navigation that the Navigator checks all settings in the ECDIS Chart Display, the Chart Alert and
the Look Ahead functions at the beginning of each navigational watch.
When the personalized display settings in Profiles are being used, then a screenshot of each of the personalized Profiles
should be created and the configuration of each Profile should be verified at regular intervals.
Navigation Officer of the watch Chart Display checked by Master
(If applicable)
© FURUNO MARITIME TRAINING a part of Furuno Denmark A/S 2016. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of FMT.
Z:\Training Courses\TST FMD\TST FMD {out of house}\03.17\04 Trainees Manual\Furuno ECDIS Trainee course manual version 4.0
43
To Next Page
Loading...
