To Next PageTo Next Page
Need help?Do you have a question about the Furuno FMD-3200-BB and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Screen Size | 12.1 inches |
| Resolution | 1024 x 768 pixels |
| Input Voltage | 24 VDC |
| Weight | 4.5 kg |
| Display Size | 12.1 inches |
| Type | ECDIS |
| Power Supply | 24 VDC |
| Touchscreen | Yes |
| Operating Temperature | -15°C to +55°C |
| Interfaces | Ethernet, USB |
| Certifications | IMO, IEC |
The primary title of the document.
Details the manual's scope, necessary preparation, and trademarks.
Instructions for activating and deactivating silent mode for audio alarms.
Explains how to access the Common Installation Setting menu via LAN or control unit.
Details on configuring basic settings like Equipment ID, monitor, and printer.
Enters ship parameters, sensor positions, and own ship information.
Sets signals and input data for various sensors like GPS, Radar, etc.
Configures sensor data types, integrity, and connection for GPS, VDR, etc.
Defines the active processor units (ECDIS, Chart Radar) and their combinations.
Establishes connection with FAR-2xx8 series radar processor units for ECDIS.
Configures Sensor Adapters, including their serial input/output and digital settings.
Configures connection boxes (RCB-002) for displaying echoes from non-Furuno radars.
Sets up monitoring for HUB connection status and alerts.
Configures serial I/O, analog input, and HUB ports for external equipment.
Allows adding or editing custom sensor types and manufacturers.
Configures external switch for shuttle ferry mode as an 'Other Sensor'.
Menu for configuring Centralized Communication and Reporting System.
Procedure for selecting data sources and setting priorities for CCRS.
Adjusts transmission group settings for IEC61162-450 compatible sensors.
Configuration for NSR sentence output from CCRS.
Adjusts settings for the Track Control System (TCS) and compatible autopilots.
Notices for sensor data connection and dongle confirmation for TCS.
Step-by-step guide to setting up the TCS for autopilot connection and configuration.
Sets navigation parameters like ship speed, turning radius, and forwarding distance.
Manages manual switching of ECDIS units for autopilot control.
Detailed TCS configuration options for rules, monitoring, and track control.
Sets tolerance values for sensor integrity checks.
Configures data format for route data output to external equipment.
Sets up the Alert Management System interface and operating mode.
Configures alert monitoring interval, buzzer patterns, and transfer categories.
Assigns master and backup AMS units for alert data output.
Configures alert groups and transfer settings to navigational equipment.
Provides settings for Category C alert silence, BR-2000 connection, and ACK signals.
Procedures for importing and exporting AMS menu settings.
Manages alert groups and definitions for external equipment.
Allows creation, deletion, and sorting of alert groups.
Step-by-step guide to creating a new alert group with specific alerts.
Procedure for editing existing alert groups and adding/removing alerts.
Steps to delete alert groups from the system.
Enables/disables and configures alerts for specific equipment types.
Guide to adding new alert definitions, including name, ID, and priority.
Details on editing alert definitions, including priority and escalation settings.
Procedure for deleting specific alert definitions from the system.
Handles configuration consistency checks, saving, and synchronization.
Steps to perform consistency check and save the current system configuration.
Instructions for saving configuration data to external media like USB or PC.
Instructions for loading configuration data from external media.
Displays system information for processor units, monitors, and adapters.
Procedure for updating the software of processor units, radar units, and control units.
Performs factory tests and restores system default settings.
Configures the layout and data displayed on the conning display.
Selects data sources for display components on the conning screen.
Provides advanced configuration options for conning display components.
Sets the forwarding distance parameter used for ship steering control.
Activates synchronization of the system clock with the ship's clock.
Customizes data display color in Sensor Information Box based on integrity check results.
Procedure to set the unique Equipment ID for the Sensor Adapter.
Instructions for saving the Sensor Adapter log file to a PC for status checking.
Guide to updating the firmware program of the MC-3000S Sensor Adapter.
Steps to activate the maintenance program for firmware updates.
Procedure to verify the current firmware version of the Sensor Adapter.
Detailed steps for updating the firmware program using FTP.
Enables the dual gyro system by configuring gyro selectors and serial ports.
Steps to configure the IGMP querier of HUB-3000 for network construction.
Sets installation parameters for the Raytheon Anschutz Autopilot NP-5400.
Configures the HCS (Hull Control System) setting for the autopilot.
Configures alerts and backup navigator settings for the NP-5400 autopilot.
Provides necessary settings for BNWAS when installed with AMS.
Configures serial port connections for TCS, alert, speed, and position on the NP-5400.
Sets communication sentences between FMD and NP-5400 for TCS application.
Connects FMD to NP-5400's MOXA LAN-Serial Converter for alert settings.
Connects FMD to NP-5400's MOXA LAN-Serial Converter for backup navigator.
Configures position and time ports for transmitting data to the NP-5400.
Sets the speed port for transmitting speed data from FMD to NP-5400.
Configures backup navigator (ALR sentence) output when BNWAS is connected.
Saves and synchronizes settings after completing chapter configurations.
Steps to set IP addresses for multiple Radar Connection Box RCB-002s.
