Need help?Do you have a question about the Furuno FR-2125V and is the answer not in the manual?
General| Range | 72 nautical miles |
|---|---|
| Power Consumption | Approx. 150 W |
| Operating Temperature | -15°C to +55°C |
| Frequency | 9.41 GHz |
| Display Size | 12.1 inches |
| Display Resolution | 800 x 600 pixels |
| Weight | 6.5 kg |
| Power Supply | 24 V DC |
| Antenna Rotation Speed | 24 RPM |
| Weight (Display Unit) | Approx. 6.5 kg |
| Range Scales | 0.25, 0.5, 0.75, 1.5, 3, 6, 12, 24, 48 nautical miles |
| Beam Width | 1.9° (Horizontal), 22° (Vertical) |
Details the risks of electromagnetic radio frequency energy emitted by the radar antenna.
Warning regarding electrical hazards and the need for qualified personnel to service equipment.
Safety measures for working on the radar antenna unit, including fall protection.
Procedure for powering up the radar system, including warm-up time.
Steps to activate radar transmission from standby mode.
Description of the main control panel, buttons, and functions.
Adjusting receiver sensitivity and suppressing sea/precipitation clutter.
How to determine target distances using rings/VRMs and directions using EBLs.
Using EBL for collision risk evaluation and setting target alarm zones.
Measuring range/bearing between targets and activating guard zones.
System for tracking targets, assessing motion, and calculating collision risks.
Using programmable function keys for optimized radar setups and operations.
Detailed guidance for technicians on diagnosing hardware and software issues.
Details on ARPA-specific controls, menus, and activation procedures.
Explains automatic and manual target acquisition, tracking, and symbol usage.
Covers displaying target data, vector modes, past positions, and set/drift corrections.
Details on CPA/TCPA alarms, guard zones, operational warnings, and trial maneuvers.
To Next Page
