Need help?Do you have a question about the Furuno FR-2125 and is the answer not in the manual?
General| Display Size | 10.4 inches |
|---|---|
| Power Output | 4 kW |
| Antenna Type | Open Array |
| Power Supply | 24 VDC |
| Frequency | 9410 MHz ± 30 MHz |
| Range Scales | 0.125 to 96 NM |
| Weight | Approx. 25 kg |
| Antenna Length | 6 feet |
| Beamwidth | 1.9° (Horizontal) |
| Rotation Speed | 24 RPM |
Outlines the step-by-step process the radar follows upon power-up.
Explains the automatic system for optimizing receiver performance.
Details the conditions and methods for acquiring and tracking radar targets.
Explains the DC power supply circuit and its components.
Explains the AC power supply circuit and its components.
Guides on adjusting parameters within the radar's display unit.
Details the procedure for adjusting the Cathode Ray Tube display.
Provides instructions for adjusting the radar's scanner unit components.
Guides on performing and interpreting the radar's self-test diagnostics.
Provides essential precautions before replacing major components like the magnetron.
Specific instructions and safety notes for replacing the magnetron.
Step-by-step instructions for updating the radar system's software.
Explains system error messages and their potential causes.
Describes visual indicators on the display that signal abnormal system conditions.
Offers a troubleshooting guide for when the display shows no image.
Guides on diagnosing and resolving issues with an abnormal radar display.
Steps to diagnose why the radar antenna is not rotating.
Troubleshooting guide for a display showing no echoes or only white noise.
Steps to diagnose and resolve issues with low radar sensitivity.
Guides on troubleshooting why radar targets cannot be acquired.
To Next Page
