4.4 Updating Program
4-6
9. The updating is complete with “[Upload Complete !]” message.
The FS-2570C is displayed as follow.
- When the T-CPU is updated,
TRX PROGRAM UPDATE EEPROM ALL CLEAR
SELECT MACHINE TYPE PLEASE POWER OFF
appears.
-
When the C-CPU is updated, RT display appears.
10. Turn off the system and on it again.
11. When updating T-CPU and C-CPU, perform ALL CLEAR. See page 3-2.
12. Confirm the program version level as below.
Checking detail program version
Carry out the self-test by pressing [3] with the DSC display. After the test, press [1:RT]
5 times while holding [FILE] to show the program version in detail.
Table 4.4.1 Test Item and program
Test Item Program
MAIN CPU T-CPU
PANEL-1 C-CPU for No.1 FS-2570C
PANEL-2 C-CPU for No.2 FS-2570C
MODEM DSC MODEM
NBDP MODEM NBDP MODEM
To Next Page
Loading...
