4.4 Updating Program
4-8
8. The PC display changes as below. The updating is complete with “Finish version
up” message. The FS-2570C display is changes to RT display.
9. Turn off the system and on it again.
10. Check the program version level as below.
Checking program version
Carry out the self-test by pressing [3] with the DSC display. After the test, press [1:RT]
5 times while holding [FILE] to show the program version in detail.
Table 4.4.2 Test Item and program
Test Item Program
MAIN CPU T-CPU
PANEL-1 C-CPU for No.1 FS-2570C
PANEL-2 C-CPU for No.2 FS-2570C
MODEM DSC MODEM
NBDP MODEM NBDP MODEM
To Next Page
Loading...
