Furuno FS-2570 - 3. Self-Test Procedures; 4. Program Version Check

Check List
v
3. Self test
No. Test Procedure Result Refer to
3.1 DSC self test Press [3 TEST] with DSC display. Page 6-1
3.2
RT self test
Press [3 TEST] with RT display. Items to be
checked differ between FS-1570 and
FS-2570.
Page 6-5
3.3
Terminal unit self
test
[F6], select “self test” Page 6-11
3.4
Antenna coupler
self test
Set S2#2 to ON and press [S3:TUNE] on the
COUP board.
The self test is not executed when
[S1:MANUAL/AUTO] is set to MANUAL.
Page 6-10
3.5
Printer self test
To print out the self test result, turn on the
system while holding down [LF].
To print out the DIP switch setting, turn on the
system while holding down [NLQ].
4. Check of program version
Use the system with the latest program.
No. How to read program number Refer to
4.1
Press [3 TEST] with DSC display for DSC self test.
To check the detail program version, press [1 RT] five times while holding
down [File] with the test result display.
Page 6-1
Page 6-2
4.2
Press [F6] and select “self test” for terminal unit self test.
To check the detail program version, press [F1] while holding down [Alt]
and [Fn] with the test result display.
Page 6-11
4.3 U1 in antenna coupler unit Page 2-22