1. SYSTEM INTRODUCTION
1-3
• Full screen (Single section, undivided): Plotter, Fish Finder, Plotter + Fish Finder
(right-side quarter of the screen), Radar;
• Two sections: Plotter, Fish Finder, Radar;
• Three sections: Left-side of the screen (Plotter, Fish Finder, Radar), Right-side top
or bottom quarter screen (Plotter, Fish Finder, Radar, Instruments).
Follow the procedure below to customize a home screen.
1. Tap the [Home] icon to show the [Home] screen.
2. Tap the [+] icon to show the [Edit Page] screen.
If the [+] icon is not visible, drag the page list to show the icon.
Note: If there are 10 pages already registered, the [+] icon is grayed out and can-
not be selected. In this case, see section 1.4.3 for how to remove pages.
3. Referring to the figure below, set up the page.
1.4.3 How to edit and delete pages
You can edit and delete pages from the [Home] screen. Long-tap the icon for the page
you wish to edit or delete, then tap the appropriate icon (see figure below).
Pin tool icon: Tap to save the selected page in the [Quick Page] list.
Edit contents icon: Tap to customize the page contents. (See section 1.4.2.)
Trash icon: Tap to delete the selected page.
Note: The full-screen plotter page (single-section) is not editable.
Select the page layout
you want to use.
Select the page layout
you want to use.
Page
layout
options.
Options available
to display on the
selected layout.
Drag an option to add
it to the current layout.
Drag an option to add
it to the current layout.
Tap
[
OK
]
to save
the new layout.
Long
tap
Pin tool
icon
Trash
icon
Edit
contents
icon
To Next Page
Loading...
