12
Optional triducer
525ST-MSD
The optional triducer 525ST-MSD is designed for thru-hull mounting. For how to install it, see "th-
ru-hull mounting” on page 7.
Triducer 525ST-MSD
525ST-PWD
The Transom Mount Transducer or TRIDUCER
®
Multisensor with Integral Release Bracket
525ST-PWD is manufactured by AIRMAR Co. These instructions are included with the sensor.
Pre-test for speed and temperature
Connect the sensor to the instrument and spin the paddlewheel. Check for a speed reading and
the approximate air temperature. If there is no reading, return the sensor to your place of pur-
chase.
Tools and materials needed
Scissors
Masking tape
Safety goggles
Dust mask
Electric drill
φ79 mm
133 mm
2.00"-12 UN
threads
φ51 mm
27 mm
7 mm
140 mm
To Next Page
Loading...
