Need help?Do you have a question about the Furuno GD-3300 and is the answer not in the manual?
General| Resolution | 800 x 480 pixels (WVGA) |
|---|---|
| Power Supply | 10-40 V DC |
| Operating Temperature | -15°C to +55°C |
| Display Type | 7" Color LCD |
| Type | Marine GPS Chartplotter |
| GPS Accuracy | 3 meters (10 ft) |
| Display | 7" Color LCD |
| Antenna | Internal |
Warning about opening the equipment and working inside.
Keep heaters away from equipment to prevent cord damage.
Use the correct fuse rating to avoid equipment damage.
Procedure for inserting electronic chart cards into the unit.
Steps for turning the unit power on and off.
Details on Plot, Video Pilot, and Nav Data display modes.
How to navigate and use the unit's menu system.
How to use the hold function to stop track recording.
Methods for deleting track data by color or cursor.
Methods for inscribing marks with cursor or manual input.
Methods for deleting marks by cursor or all marks.
Methods for entering waypoints by coordinates, cursor, or ship's position.
Methods for deleting waypoints by cursor or list.
How to set a destination waypoint for navigation.
Methods for creating routes via route list or waypoints.
Navigating a stored route, switching waypoints automatically.
Methods for deleting specific or all route waypoints.
Setting and function of arrival and anchor watch alarms.
Setting and function of cross-track error and border alarms.
Setting and function of the ship's speed alarm.
Features available when connecting an autopilot unit.
Displays autopilot information on the plot display screen.
Displays autopilot information on the video pilot display screen.
Procedure for preparing a memory card for use.
Configuration for GPS and DGPS initial settings.
Built-in tests for checking system operation.
Explains common error messages and their solutions.
A table to help identify and resolve operating problems.
To Next Page
