1-20
1.19 Setting the Time and Date
The internal clock marks time and is used to perform navigation cal-
culations (for example, time-to-go). Set the clock and the date as fol-
lows:
1. Press the [MENU] key.
2. Press the [8] key to display the INITIAL SETTINGS menu.
8 INITIAL SETTINGS
VTD AVG TIME = 10MIN
DATE = 1998-04-00 (YYYY-MM-DD)
TIME = 10: 01: 50
EXTERNAL CLOCK = ON OFF
AUTOPILOT DISPLAY = ON OFF
TD INDICATION = LA LC OFF
Figure 1-22 INITIAL SETTINGS menu
3. Select DATE.
4. Enter date; year, month and day in that order. Enter year in four
digits and month and day in two each. To enter April 10, 1998,
for example, press [1], [9], [9], [8], [0], [4], [1], [0].
5. Select TIME.
6. Enter hour, minute and seconds in two digits each. To enter 18:30,
for example, press [1], [8], [3], [0], [0], [0].
7. Press the [ENT] key.
Note: The time on the navigation data display is updated continually
by the internal clock but the time display on the INITIAL SETTINGS
menu is not updated.
To Next Page
Loading...
