Furuno GD-3300 - Changing Shape, Color of Specific Marks

3-3
3.3 Changing Shape, Color of Specific Marks
The color and shape of specific marks can be changed as follows:
1. Press [MENU], [9] and [1] to display the EDIT/TRACK MARK
menu.
9-1 EDIT TRACK/MARK
ITEM = CHG TRACK DEL TRACK CHG MARK DEL MARK
MODE = CURSOR BOX ON SCRN OFF SCRN
COLOR = 1 2 3 4 5 6 7 8 (SAME)
SHAPE= SAME
SELECT COLOR AND/OR SHAPE, AND PRESS ENT.
Figure 3-4 EDIT/TRACK MARK menu
2. Select CHG MARK from the ITEM field.
3. Select method of change from the MODE field:
CURSOR: Select the marks to edit with the crosshair cursor.
BOX: Circumscribe the marks to edit with the box cursor.
ON SCRN: Edit all marks displayed on the screen.
OFF SCRN: Edit marks stored in memory.
4. Select the COLOR field.
5. Select new mark color.
6. Select the TYPE field.
7. Select mark type desired.
8. For CURSOR or BOX, select start point.
9. Press the [ENT] key.
10. For CURSOR or BOX, select stop point.
11. Press the [ENT] key.
12. Press the [ENT] key again.