Furuno GD-3300 - Changing Current Mark Color

3-2
3. Select the LATITUDE field. Enter latitude.
4. Select the LONGITUDE field. Enter longitude.
5. Press appropriate mark key (1-9).
3.2 Changing Current Mark Color
Mark color is available in the colors shown on keys 1-7. When a
mark is entered it is inscribed in the color of the cursor mark in the
data window at the top of the display. You can change mark color
freely through the CHANGE MARK COLOR menu.
+36° 44.257’ N 340.5°
134° 40.719’ E 10.0KTS
1.46NM
109.8 °
0.10NM
2D 1.2
The color of "+"
is mark color.
Figure 3-2 Location of mark color indication
1. Press the [MARK COLOR] key to show the CHANGE MARK
COLOR menu.
CHANGE MARK COLOR
MARK COLOR = 1 2 3 4 5 6 7
SELECT MARK COLOR BY NUMBER.
Figure 3-3 CHANGE MARK COLOR menu
2. Press appropriate numeric key among 1-7 to select color.
3. Press the [ENT] key.