Furuno NAVNET 3D MFDBB - Page 18

Chapter 1: Operational Overview
1-3
3SAVE/MOB SAVE(short push): Save current position as
waypoint.
MOB(long push): Save current position as
MOB.
F2
4 CTRL key Switch active display. F6
5 Rotary Knob • Rotate to;
- display ROTOkeys
- select setting
- select option
•Push to;
- display ROTOkeys
short push to show "basic" ROTOkeys; long
push to show ROTOkey quantity selected on
the menu.
• - confirm selection
Scrollwheel. Spin or
push to display
ROTOkeys or select
option; push to con-
firm selection.
6 DISP Select display. F3
7 CANCEL key Cancel last entry (undo); silence audio alarm. Esc
8 POINTS/ROUTE POINTS(short push): Save current position as
waypoint.
ROUTE(long push): Open route building tool.
F9
9 GOTO/LIST GOTO(short push): Save current position as
waypoint.
LIST(long push): Open route building tool.
F8
10 Cursorpad • Pad: Shift cursor.
• : Like the "click" button on a PC mouse.
Hereafter referred to as "left-button key".
• Drag mouse.
• Left mouse button.
11 ((Right-button
key)
Show/erase pop-up menu. Hereafter referred to
as "right-button key".
Right mouse button
12 DATA/VOL DATA(short push): Show/hide NavData.
VOL(long push): Change audio level.
F7
13 MENU Open/close menu. F4
14 GAIN/TX GAIN(short push): Adjust radar gain.
TX(long push): Toggle between standby and
transmit for radar.
F5
15 RANGE OUT,
RANGE IN
Choose range on chart and radar. F10: RANGE OUT
F11: RANGE IN
16 Scrollingpad • Pad: Scroll chart; offcenter radar picture.
• SHIP/3D button: Momentary push to center
vessel; long push to alternately enable and
display the 3D display.
• Left and right
mouse buttons.
•F12
17 Power lamp Lights in green when power is on –
Control description
No. Label Function
Key on PC or
control on mouse