What to do if there is no magnetic bearing data from Furuno Accessories?
If you are not receiving magnetic bearing data, cycle the power on and off a few times. If the issue continues, contact your dealer. Also, verify the terminal switch is properly set.
How to fix Furuno PG-700 Accessories when lamps do not light?
If the lamps are not lighting, check that the connector is tightened, the cable is free from corrosion and damage, and the power supply routing is functioning as expected.
Warnings and precautions for installing the equipment, covering power, cables, and magnetic interference.
Safety warnings for operating the equipment, including fire hazards, malfunction indicators, and modification restrictions.
Detailed instructions for connecting the sensor unit, including junction box and direct connections to networks.
Common problems like lamps not lighting or no bearing data, with suggested inspection and action steps.
General| Resolution | 0.1° |
|---|---|
| Operating Temperature | -15°C to +55°C |
| Storage Temperature | -30°C to +70°C |
| Output | NMEA 0183 |
| Accuracy | 0.5° |
| Input Voltage | 12-24 VDC |
| Interface | NMEA 0183 |
| Range | 0 to 360° |
To Next Page