Furuno PG-700 - Lamp Status Display

3. MAINTENANCE AND TROUBLESHOOTING
16
3.2 Lamp status display
Lamp Status Unit operating condition
Normal state
• Deviation correction: success
• Angular velocity sensor: initialization complete
• Deviation correction: success
• Angular velocity sensor: initializing
• Deviation correction: not implemented (or failed)
• Angular velocity sensor: initialization complete
• Deviation correction: not implemented (or failed)
• Angular velocity sensor: initializing
• Deviation correction: success
• Angular velocity sensor: failure
• Heading data output of the magnetic sensor only
• Deviation correction: not implemented (or failure)
• Angular velocity sensor: failure
• Heading data output of the magnetic sensor only
• Magnetic bearing sensor: failure
• No output of magnetic bearing data
CALIB STATUS CHECK
CALIB STATUS CHECK
CALIB STATUS CHECK
CALIB STATUS CHECK
CALIB STATUS CHECK
Light alternately.
CALIB STATUS CHECK
Light alternately.
CALIB STATUS CHECK
: ON (red): ON (green)
: Flashing (green)
: OFF