Furuno WR-2100 - How to Install Software

SSE-14-0022_17
7
Specification
Function
Data manipulation:
• Saving of displayed data
Save as a chronological order unit (Time based file name)
• Play of displayed data
Play from the specification file name.
Data output:
• Output of data file
Output per 1 to 5minutes
2.3. How to install Software
Use “Setup.exe” (in CD-ROM) to install the software.
If reinstallation is required, first uninstall the software, then install it again because there is no function to
correct the specific programs, etc. individually.
For reinstallation, conduct the setting from the beginning because the current setting values are deleted.