In the image above, one Apollo RA770
stereo
À
connects to a wireless router
Á
and to two Apollo SRX400 zone stereos
Â
. The two FUSION PartyBus stereo
zone stereos can stream sources from the
FUSION PartyBus stereo.
A FUSION PartyBus zone stereo is not the
same thing as a speaker zone. It is an
independent stereo that can either play
media from connected sources or stream
from a FUSION PartyBus stereo on the
network. You can connect a FUSION
PartyBus zone stereo, such as an Apollo
SRX400 zone stereo, to a single speaker
zone
Ã
. You can connect a FUSION
PartyBus stereo, such as an Apollo RA770
stereo, to multiple speaker zones
Ä
to
cover a larger area with that stereo.
FUSION PartyBus devices cannot control
the speaker volume of another stereo. You
can adjust the volume of speakers or
speaker zones connected directly to the
stereo only.
Connecting the FUSION PartyBus
Device to a Wireless Access Point
1
Select > SETTINGS > NETWORK
> WI-FI CLIENT > SSID.
A list of wireless access points within
rage appears.
2
Select the FUSION PartyBus wireless
access point.
3
Select an option:
• To enter the password, select
PASSWORD, enter the password,
and select .
• If you are connecting to the
wireless access point using WPS,
verify that WPS has been enabled
on the access point, and select
WPS.
NOTE: It can take up to two
minutes to successfully connect to
the access point after you select
WPS.
4
Select SAVE.
6 Quick Start Manual