Fusion Apollo MS-SRX400 Quick Start Manual

Streaming from a FUSION PartyBus
Network Device
Before you can stream media from a
FUSION PartyBus stereo, you must
connect the device to the FUSION
PartyBus network using a wired or
wireless connection. See the Apollo
RA770 installation instructions.
You can stream media from an Apollo
RA770 stereo, but you cannot stream
media from another Apollo SRX400 zone
stereo.
NOTE: You cannot stream from a stereo
using the Apple AirPlay source.
1
Select
.
2
Press and hold the dial to select the
PARTYBUS tab.
TIP: You can press and hold to
quickly join the FUSION PartyBus
network.
The device shows a list of available
FUSION PartyBus stereos on the
network.
3
Select the stereo you want to stream
from.
The Apollo SRX400 zone stereo begins
streaming the same source as the
connected FUSION PartyBus device, and
a green border appears around the device
screen. All media playback functions affect
both devices.
Stopping Streaming from a FUSION
PartyBus Device on the Network
If you are streaming from a FUSION
PartyBus device on the network, you must
disconnect from the device before you can
play local sources on the stereo.
1
Select .
2
Select PARTYBUS > LEAVE
PARTYBUS.
TIP: You can press and hold to
quickly leave the FUSION PartyBus
network.
DSP Settings
This stereo features digital signal
processing (DSP). You can select pre-
configured DSP settings for FUSION
speakers and amplifiers to optimize audio
reproduction in their installed locations.
All DSP settings are configured using the
FUSION-Link remote control app. See the
owner's manual for more information.
Quick Start Manual 7

Fusion Apollo MS-SRX400 Specifications

General

Brand	Fusion
Model	Apollo MS-SRX400
Category	Marine Audio
Language	English