Why is there no sound from my Fusion EN-AM8001?
If there's no sound coming from your Fusion Amplifier, several factors could be at play. Start by verifying the RCA connections to the head unit and ensuring the head unit volume is at an audible level. Check that you have properly set up the amplifier gain level control. Inspect all power, remote on, and ground connections to the amplifier. Finally, check the speakers for any wire shorts.
What to do if my Fusion Amplifier is not working but the status LED is on?
If your Fusion Amplifier's status LED is illuminated but there's no output, there are a few things you can check: * First, see if the fuse on the amplifier has blown and replace it with the correct type and amperage. * Second, the amplifier might be overheating. In that case, move the amplifier to a more ventilated area or turn down the head unit volume. * Third, inspect the speaker wires for shorts, ensuring they aren't touching each other or the vehicle chassis.
How to fix a Fusion Amplifier that is not switching on?
If your Fusion Amplifier isn't powering on, here's what you should check: * First, confirm that there's +12V reaching the power wire by inspecting the fuses and connections to the battery. * Second, ensure the remote wire is receiving power by checking the remote on connections to the head unit. * Third, verify the fuse isn't broken. If it is, replace the fuse with the correct type and amperage.
General| Channels | 1 |
|---|---|
| Bass Boost Frequency | 45Hz |
| RMS Power @ 1 Ohm | 800W |
| Frequency Response | 10Hz |
| Input Sensitivity | 0.2V - 6V |
| Subsonic Filter | 10Hz |
| Bass Boost | 0dB |
To Next Page