ARTWORK-
Enable
or
disable sending
Album
Artwork
over NMEA2000
network.
Disable to reduce data
traffic
on
NMEA2000
network.
Note: The
MS-88300
can
be completely disconnected
from
the constant +
12V
voltage supply
(Battery switch)
with
no settings lost.
SOURCES-
Use this option to
turn
on/off
the
AM
source.
For
example
this
is
useful
if
you only wish to listen to
FM
and
do
not wish to step
through
AM when selecting a
tuner
source.
Note: USB/iPod/MTP Device source only available
if
a device is connected.
SET
DEVICE
NAME-
Select ' Set Device Name· to give the
MS-88300
a
network
name of
your
choice. The name is visible to
other
devices (Marine Wired Remotes
MS-NRX200i) connected to the same
network.
Rotate the
rotary
encoder to
change the character.
Press
the
rotary
encoder to select. Press the ' Previous'
button to delete characters.
·To
save changes
press
the
'Play· key.
·
To
exit
without
saving any changes: press
the
Menu key.
UPDATE-
MS-88300-
This option is provided
for
future
MS-88300
software
updates.
MS-NRX200i: This option is provided
for
future
software
updates to
remote
controls
(MS-NRX200i) attached to
your
MS-88300.
Note: FUSION recommends updating
all
remote(sl
software
via the
MS-88300
at
time of
installation
to ensure
compatibility
. This can
be
done via the Update menu. Please
refer
to
your
remote manual
for
more
information.
FACTORY
RESET-
The
factory
reset function
will
return
all
settings in the
MS-88300
to the
factory
default
value.
Warning:
All
AM and
FM
presents
are erased. Tuner region is
reset
to USA.
All
zones
are
enabled and zone settings, tone,
subwoofer
filter
settings, source
settings
and device name
are
returned
to
def~ult
values.
ABOUT-
This option displays the
MS-88300
Marine Stereo
software
version,
remote
control
version and
F-Link
software
versions.
To Next Page
Loading...
