Fusion MS-AV700i User Manual

55
56
To change the sub filter setting:
1. Press the Menu key.
2. TurnandthenpresstheRotaryEncodertoselect Settings > Sub filter.
3. TurntheRotaryEncodertoselecttherequiredfilterfrequency.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit
Key sound
The700Seriesmakesashortbeepingsoundwhenanykeyispressed.Thisfeature
canbeturnedonoroff,asrequired.
To enable or disable the key sound:
1. Press the Menu key.
2. TurnandthenpresstheRotaryEncodertoselectSettings>Keysound.
3. PresstheRotaryEncodertoturnonkeysound(audiblebeeps)()
orturnoffkeysound(silent)()
4. Press any key to exit
Language
The700SeriescandisplaymenusandscreensinEnglish,Dutch,French,German,
Italian or Spanish.
To select the required display language:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectSettings > Language.
3. TurntheEncodertoselecttherequiredlanguage.
4. PresstheEncodertosavethesettingandexit.
5. Press any key to exit
Power save
Ifyouareoperatingthe700Seriesonbatterypower,youcanturnonthepower
save option to reduce drain on the battery. The LCD screen shuts down automatically
after1minuteofinactivity(pressanykeytorestoredisplay).
To enable or disable power saving mode:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectSettings > Power save.
3. PresstheEncodertoturnonpowersaving()
 orturnoffpowersaving().
4. Press any key to exit
Tel mute
Usethisoptiontocontrolwhichactionistakenwhenthe700Seriesisconnectedto
a cellphone hands-free kit.
To change the Tel mute setting:
1. Press the Menu key.
2. TurnandthenpresstheEncodertoselectSettings > Tel mute.
3. TurntheEncodertoselecttherequiredoption:
• Mute.Mutestheaudiooutputfromthe700Serieswhenacallisreceivedon
your cellphone.
• Aux. Allows the received call to be broadcast through the Auxilary input on the
700Series.
Note: This feature may not operate all available hands-free kits. Hands free
kit must be connected to the TELMUTE input and
AUX input.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit
Tuner region
Use this option to select the correct region .
To change the tuner region setting:
1. Press the Menu key.
2. TurnandthenpresstheRotaryEncodertoselectSettings > Tuner region.
3. TurntheRotaryEncodertoselecttherequiredregion.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit
VHF region
UsethisoptiontoselectthecorrectVHFtuningregion.Pleaserefertothespecifica-
tions section for additional channel information.
To change the VHF region setting:
1. Press the Menu key.
2. TurnandthenpresstheRotaryEncodertoselecttheSettings > VHF region.
3. TurntheRotaryEncodertoselecttherequiredregion.
4. PresstheRotaryEncodertosavethesettingandexit.
5. Press any key to exit

Fusion MS-AV700i Specifications

General

Brand	Fusion
Model	MS-AV700i
Category	Marine Audio
Language	English