#$/0%2!4)/.
If there is no CD loaded press OPEN Button (7) and gently insert the disc until you feel some resistance. The CD
will be drawn into the unit and playback will begin.
If there is a CD already in the unit press the MODE button (6) until CD mode is displayed.
EJECTING A DISC
Press the OPEN button (7) and press the EJECT button
(4).
PAUSE PLAY
Press PAUSE/PLAY button (20) to pause play, press
again to resume.
TRACK SELECTION
Press the button (16) to skip to the previous
track or Button (17) to skip to the next track.
Press and hold (17) to FAST FORWARD and (16) to
FAST REWIND.
REPEAT TRACK
Press RPT button (22) to continuously repeat the
track. Press again to cancel.
SHUFFLE
Press the SHF button (23) to play the tracks in a
random order. Press again to cancel.
SCAN TRACKS
Press SCN button (21) to play a few seconds of each
track. Press again to cancel and continue playing the
track.
2!$)//0%2!4)/.
Press the MODE button (6) to select the Radio mode.
SELECTING FREQUENCY BAND
Press BND/LOU/ENT button (13) to cycle through and select the desired band
-%.53%,%#4)/.&5.#4)/.
Press and hold SEL button (10) to enter Menu Select Mode. Press the VOLUME UP button (12) or the VOLUME
DOWN button (11) to adjust the BEEP function.
BEEP 2nd MODE
Only beeps on press and hold functions.
BEEP ALL
Beeps on all key presses.
BEEP OFF
Beeps disabled.
FM 1 FM 2 FM 3 AM
SELECTING STATION
Auto Seek
Press the button (16) or button (17) to
activate the automatic seek function up or down the
frequency spectrum.
Manual
Press and hold the button (16) or the
button (17) until MANUAL appears on the screen. If
neither button is pressed for several seconds the unit
will switch to AUTO SEEK.
AUTOMATIC MEMORY STORING AND PRESET SCAN
Automatic Memory Storing
Press and hold the AS/PS button (18) and the unit will
search for the strongest signals and then store them
in the presets.
Preset Scan
Press the AS/PS button (2) to preview all stored
preset stations. Stations with weak signal levels are
bypassed.
STORING PRESET STATIONS
There are six presets available for each band (FM1,
FM2, FM3 and AM).
1. Select the desired band and tune in the station
you want to store.
2. Press and hold the PRESET button (14) 1-6
until a beep is heard to confirm and the preset
number is displayed.
MONO/STEREO
Press MON button (1) to select Mono or Stereo mode.
LOCAL/DISTANT SELECTION
Press LOCAL/DIST Station button (2) to select between
local and distant stations. Local setting for reception of
strong station, and a distant setting for reception of
weaker stations.
CD OPERATION
MENU SELECTION
To Next Page
Loading...
