to prevent possible interruption to audio after pairing a
Bluetooth device to the stereo.
REMOVE DEVICE: Removes the Bluetooth device from the
stereo. To listen to audio from this Bluetooth device again,
you must pair the device again.
USB Device Playback
You can connect various USB media players and smartphones
to the stereo. For example, you can connect an Android
™
smartphone, a USB flash drive, or a compatible Apple
®
device.
For information about compatible devices, see the owner's
manual for the stereo.
Controlling Music Playback on a USB Flash
Drive
1
Connect a compatible USB flash drive or media player to the
stereo.
2
Select the USB source.
3
Select .
4
Select the name of the USB drive to view the file structure of
the USB flash drive or media player.
5
Select a song to begin music playback.
Shuffling Songs
The shuffle feature is available on the USB source only.
NOTE: The shuffle feature is controlled by the music application
on connected Apple and Android devices, if supported by the
application.
1
From the USB source, select .
2
Select SHUFFLE.
Setting a Song to Repeat
The repeat feature is available on the USB source only.
NOTE: The repeat feature is controlled by the music application
on connected Apple and Android devices, if supported by the
application.
1
From the USB source, select .
2
Select REPEAT.
Controlling Music Playback on an Apple or
Android Device
1
Connect a compatible Apple or Android device to the stereo
using USB or Bluetooth.
2
Select the appropriate source.
3
Launch a music application on the connected Apple or
Android device and begin playback.
You can use the stereo controls to play, pause, and skip tracks.
Radio
To listen to AM or FM radio, you must have a suitable marine
AM/FM antenna properly connected to the stereo and be within
range of a broadcasting station. For instructions on connecting
an AM/FM antenna, see the stereo installation instructions.
Setting the Tuner Region
You must select the region you are in to receive AM and FM
stations properly.
1
Select > SETTINGS > TUNER REGION.
2
Select the region you are in.
Changing the Radio Station
1
Select an applicable source, such as FM.
2
Select repeatedly to move through the tuning modes:
• Select AUTO to scan and stop on the next available
station.
• Select MANUAL to select a station manually.
• Select PRESETS to select a saved station preset.
3
Select or to tune to the station.
Presets
You can save your favorite AM or FM stations as presets for
easy access. You can save up to 15 presets for each radio
band.
Saving a Channel as a Preset
1
With an applicable source selected, tune the stereo to a
channel.
2
Select > PRESETS.
3
Select SAVE CURRENT or ADD PRESET.
TIP: You can quickly save the selected channel as a preset by
holding .
Removing Presets
1
With an applicable source selected, select > PRESETS >
REMOVE PRESET.
2
Select an option:
• To remove one preset, select the preset.
• To remote all presets, select REMOVE ALL PRESETS.
General Settings
Select > SETTINGS.
NOTE: When an option button is filled, the option is on. When
the button is clear, the option is off.
NOTE: Not all options and settings are available for all stereos.
See the stereo owner's manual for more details.
ZONE: Enables you to configure the speaker zones.
ZONE > TONE: Adjusts the bass, middle, and treble tones.
LCD: Sets the brightness and contrast.
POWER SAVE: Enables and disables the backlight power-save
feature.
KEY SOUND: Enables and disables the sound.
WAKE WITH STEREO: Turns on the remote when the stereo is
turned on.
NMEA MONITOR: Sets the data to view, the data display cycle,
and the units of measure for NMEA 2000 data.
LANGUAGE: Sets the language used on the remote.
SEARCHING: Enables FUSION Alpha Search Technology
(FAST), which allows you to quickly search for tracks by letter
or number. You can select a number to enable the FAST
menu if your music device contains more than the selected
number of items.
TUNER REGION: Sets the region used by the FM or AM source.
TEL/MUTE: Sets the behavior of the mute wire. The device can
either mute the audio or switch to the AUX input when the
optional mute wire is activated.
SET DEVICE NAME: Assigns a name to a connected stereo.
STEREO: Assigns the remote control to a connected stereo.
UPDATE: Updates the connected stereo, remote control, or
accessory.
UPDATE > FACTORY RESET: Resets the connected stereo
settings to factory default values.
USB Device Playback 3
To Next Page
Loading...
Need help?
General
