FUTABA 10CAG User Manual

37
Home screen display mode selection (
HOME-DISP
) (
HELI
only): selects the display item in the home screen for
HELI
.
ILLUST
: displays the illustration of helicopter in the home screen. (default)
THR/PIT
: displays the current throttle and pitch position in the home screen.
GOAL of EXAMPLE: STEPS: INPUTS:
Change the display mode from
ILLUST
to
THR/PIT
.
Open BASIC menu, then open
PARAMETER
submenu.
for 1 second.
(If
ADVANCE
, again.)
C
to
PARAMETER
.
Go to
HOME-DISP
and change setting.
(Ex:
THR/PIT
)
C
to
HOME-DISP
.
to
THR/PIT
.
Close.
USER NAME
: assigns your transmitter's name which is displayed in the home screen.
Adjustability and values:
• Up to 10 characters long.
• Each character may be a letter, number, blank, or a symbol.
• The default name assigned by the factory is the "Futaba" logo.
GOAL of EXAMPLE: STEPS: INPUTS:
Name
USER NAME
“Futaba”. Open
BASIC
menu, then open
PARAMETER
submenu.
for 1 second.
(If
ADVANCE
, again.)
to 2nd page of menu.
C
to
PARAMETER
.
Go to
USER NAME
and select the first
character. (Ex: _ to F)
to 2nd page of menu.
C
to
USER NAME
to
F
.
Choose the next character to change.
C
Repeat the prior steps to complete
naming the model.
to
u
(note: lower case is available)
Repeat.
Close.
THR/PIT
mode
ILLUST
mode

FUTABA 10CAG Specifications

General

Brand	FUTABA
Model	10CAG
Category	Remote Control
Language	English