FUTABA 4VF-FM - Reference; Ratings

1818
1818
18
REFERENCE
REFERENCE
RATINGS
*Specifications and ratings are subject to change without prior notice.
TRANSMITTER T4VF
(2 sticks, 4 channels, FM transmitter)
Transmitting frequency: 29, 35, 36, 40,
41, 50, 60, 72, 75 MHz
Modulation method: FM (Frequency
Modulation)
Power requirement: 12V (penlight battery
X 8) or 9.6V nicd battery
Current drain: 180mA
SERVO S3003
(standard servo)
Power requirement: 4.8V or 6V (common
with receiver)
Current drain: 8mA (idle)
Output torque: 3.2kg-cm (4.8V)
Operating speed: 0.23sec/60 degree
(4.8V)
Size: 40.4x19.8x36mm
Weight: 37.2g
RECEIVER R115F (not for USA)
(5 channels, FM receiver)
Receiving frequency: 29, 35, 36, 40, 41,
60, 72 MHz
Intermediate frequency: 455kHz
Power requirement: 6V (penlight battery
X 4) or 4.8V nicd battery (common with
servo)
Current drain: 22mA
Size: 33.4X50.4X20.5mm
Weight: 29.5g
RECEIVER R127DF
(7 channels, FM receiver)
Receiving frequency: 50, 60, 72, 75 MHz
Intermediate frequency: 1st IF 10.7MHz,
2nd IF 455kHz
Power requirement: 4.8 or 6V (common
with servo)
Current drain: 10.0mA
Size: 64.3X35.8X21.0mm
Weight: 40.5g
RECEIVER R148DF
(8 channels, FM receiver)
Receiving frequency: 35, 36, 40, 41, 50,
72 MHz
Intermediate frequency: 1st IF 10.7MHz,
2nd IF 455kHz
Power requirement: 4.8 or 6V(common
with servo)
Current drain: 13mA
Size: 55.5X25.5X22.5mm
Weight: 30.4g
SERVO S3101
(Micro servo)
Power requirement: 4.8V or 6V (common
with receiver)
Current drain: 8mA (idle)
Output torque: 2.5kg-cm (4.8V)
Operating speed: 0.18sec/60 degree
(4.8V)
Size: 28x13x29.7mm
Weight: 17g