FUTABA GY501 - DATA SETTING LCD Display and Edit Keys

36
DATA SETTING
C
RATE GYRO
LCD display
Set data display and operation
status monitoring are possible.
DATA SETTING
LCD Display and Edit Keys
Low Battery Alarm
When the power supply voltage drops to 3.8V, "LOW Batt" is
displayed. When this message is displayed, quickly stop operation
and charge the Nicd battery.
Edit keys
Setup screen call
The setup screens can be sequen-
tially called with the FUNC+ or
FUNC- key. For the order in which
the setup screens are called, see the
function map.
Data setting
Perform data setting with the DATA+
or DATA- key. When setting a value,
the data is increased when the
DATA+ key is pressed and is
decreased when the DATA- key is
pressed. The mode can also be
selected using either the DATA+ or
the DATA- key.