FUTABA T26SZ - Page 193

193
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
◆ ConnectionofT26SZgyrodataandCGYwhen“Start”isselected
ModeldataisCGY760R/
CGY755
ModeldataisCGY770R
ModeldataisCGY770R
Nogyrodata
1
2
Selecting“Yes”willstartloading
theCGY770R.
Selecting“Yes”willstartloading
theCGY770R.
Selecting“Yes”willstartloading
theCGY760R/CGY755.
Homedisplay
A.Wiredconnection:Advancedsettings
SETTING
1.Select"Gyrosetting"onthelastpageof
HelicopterModelMenu
*If"CRSF"isONinthesystemtypeofthelinkage
menu,"Gyrosetting"cannotbeselected.
2.Select"Start"
*Atthistime,ifGyroisnotconnectedtoT26SZbywire,theEQ
IDscreenappears.
C
AUTION
BesuretoconnectanddisconnecttheCGY770R
andT26SZconnectioncablewiththepoweroff.
When"GYSettingsTransfer"is
selected,thegyrosettingdatasaved
inT26SZiswrittentothegyro.
GyrosettingCGY770R