83
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
●
Tap the [Function name] button in the Linkage menu to
call the setup screen shown below.
ũƘƑƆƗƌƒƑŃƑƄƐƈ
Function name can be changed
The name of the spare functions (Auxiliary 1-8)
can be changed for the full name (10 characters) or
for the abbreviated name (4 characters).
ũƘƑƆƗƌƒƑŃƑƄƐƈŃƆƋƄƑƊƈŃƐƈƗƋƒƇ
1. Select [Function name] from the Linkage menu
and tap the screen.
2. The Function name setup screen is displayed.
3. When the function whose name is to be changed is
VHOHFWHGDQGWKHVFUHHQLVWDSSHGDPRGLÀFDWLRQ
screen is displayed.
4. Select the function to be renamed and select
[Rename] and tap the screen. A character input
screen is displayed. Input the function name.
5. When [Reset] is selected and the screen is held
down, the function name is set to the initial state
function name.
6. The function name may be displayed in 10
characters or 4 characters, depending on the
setup screen. For 4-character display, input the
function name as required.
●
Return to Linkage menu
To Next Page
Loading...
