EasyManua.ls Logo

FUTABA T26SZ - Page 97

FUTABA T26SZ
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
97
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
ŹƄƕƌƒŃŰƈƏƒƇƜŃŶƈƗƗƌƑƊ
Tapthe[Set]button
Nextpage
Currentvariometer
This is the changing point of climb and sink. When the variometer
is greater than this value, Vario Melody is climb type. When the
variometer is less than this value, Vario Melody is sink type.
Setting range5DQJHŃVHWWLQJYDOXH5DQJHŅVHWWLQJYDOXH
,QLWLDOYDOXH0.0 m/s
When the variometer is less
than this value, Vario melody
is not output.
Setting range
0 m/s PV
,QLWLDOYDOXH0.0 m/s
When the variometer is
greater than this value, Vario
melody is not output.
Setting range
-50 m/s 0 m/s
,QLWLDOYDOXH0.0 m/s
When the variometer is less than
this value, Vario melody is not
variable.
Setting range
-50 m/s Offset value
,QLWLDOYDOXH-5.0 m/s
When the variometer is greater
than this value, Vario melody is
not variable.
Setting range
Offset value PV
,QLWLDOYDOXH5.0 m/s
*Thesesettingscanbe
madeforeachsensor.
žŷƋƈŃƕƈƏƄƗƌƒƑŃƒƉŃŹƄƕƌƒŃŰƈƏƒƇƜŃƖƈƗƗƌƑƊƖƀ
Deadband
(Notsound)
Fixedmelody
Fixedmelody
Variablemelody
Variablemelody
Climbside
Discontinuous
sounds
Sinkside
Continuous
sounds
Range
Deadband
Deadband
Range
Offset
Offset
Deadband
Range

Related product manuals