REPAIR SERVICE
To insure prompt service, please follow the instructions listed below.
The gears for repairing should be sent back to the distributor or local
dealer.
1. Charge batteries for at least 18 hours prior to the despatch.
2. Return only the system, separate from your installation. Remove
servos from mounts, remove foam padding from receiver.
3. Plugs or other modifications which interfer with factory testing
procedures will be returned to factory standards at your expense.
4. Carefully pack all components individually with sufficient packing
material to prevent shipping damage. Warranty does not cover any
components damaged in transit. Also, for your own protection, insu-
re all packages.
5. Include a brief hut thorough explanation of all problems and service
required and tape to back of transmitter. Label servos as to their
function.
6.
Be
sure
to
include
your
full
address
inside
the
box
as
well
as
out-
side.
7. Include a packing list of all items being returned and double check
to make sure all items are packed for return.
To Next Page
Loading...
Need help?
General
