FUTABA T6K - Page 19

Beforeuse
19
BatteryReplacementMethod
Slidethebatterycoveroffthe
transmitterinthedirectionof
thearrowinthefigure.
Slidethebatterycover
backontothecase.
LoadthenewAAsize
batteries.Payveryclose
attentiontothepolarity
markingsandreinsert
accordingly.
Push
BatteryCover
ŬűŶŷŤůůŤŷŬŲűŃŤűŧŃŵŨŰŲŹŤůŃŲũŃŷūŨŃŷřŮŃťŤŷŷŨŵżŃ



will need to be purchased from a hobby shop.
CAUTION
Always be sure you reinsert the batteries in the correct polarity order.
If the batteries are loaded incorrectly, the transmitter may be damaged.
When the transmitter will not be used for any short or long period of time, always remove the
batteries.
If the batteries do happen to leak, clean the battery case and contacts thor-
oughly. Make sure the contacts are free of corrosion.
Check:



the case or incorrect battery polarity.
Disposal of the Dry Cell Batteries:
The method to dispose of used dry cell batteries depends on
the area in which you reside. Dispose of the batteries in ac
-
cordance with the regulations for your area.