FUTABA T6K - Page 65

65
Commonfunction
■
Back-lightmode
 Selectthe"BACK-LIT"itemand
changethemodebypressingthe
+keyor‒key.
＋ −
or
● "ALWAYS"：alwaysON
 "OFF"：alwaysOFF
 "KEY-ON"：Itlightonafter
Keyoperation.
■
Light-time
 Selectthe"LIT-TIME"itemand
changenumericalvalue(time)by
pressingthe+keyor‒key.
＋ −
or
● Itisonlyacasein"KEY-ON"
modehere.
■
Light-adjustment
 Selectthe"LIT-ADJ"item
andchangenumericalvalue
(brightness)bypressingthe+key
or‒key.
＋ −
or
● Itisthebrightestat30.
Selectionrange：
ALWAYS,OFF,KEY-ON
Default：ALWAYS
Selectionrange：1 〜 30(s)
Default：10(s)
● Whenyouwanttoreturntheset
valuetotheinitialvalue,pressthe
+keyand‒keysimultaneously.
Selectionrange：1〜30
Default：15
● Whenyouwanttoreturntheset
valuetotheinitialvalue,pressthe
+keyand‒keysimultaneously.
Back-light ／ Light-time ／ Light-adjustment
① Selectthe"BATTVIB"itemandchangetheONor
OFFbypressingthe+keyor‒key.
＋ −
or
● ON ⇒ Thebatteryalarmofatransmitteristoldwith
vibration.
Selectionrange：
ON,OFF
Batteryalarmvoltagevibration
①Selectthe"BUZ-TONE"itemandchangethe
numericalvalue(tone)bypressingthe+keyor‒
key.Thehigherthenumericalvaluethehigherthe
tone.
Buzzertone
Selectionrange：
OFF,1 〜 100
● Whenyouwanttoreturnthe
setvaluetotheinitialvalue,
pressthe+keyand‒key
simultaneously.
＋ −
or
①Selectthe"BATTALM"itemandchangethe
numericalvalue(voltage)bypressingthe+keyor
‒key.
＋ −
or
● AAalkalinebatterys⇒ 4.2VDR
● FutabaHT5F1800B⇒ 5.0VNi
● FutabaFT2F2100BV2⇒ 5.8VFe
Selectionrange：
4.2V4.6V5.0V5.4V5.8V
6.2V6.6V7.0V7.4V
Batteryalarmvoltage
*Thevoltagedropofarechargeablebattery
andadrycellbatteryisdifferent.When
usingarechargeablebattery,always
changethevoltage.