EasyManua.ls Logo

FUTABA T6K - Page 68

FUTABA T6K
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
Commonfunction
Function
Method
Callthemenuscreenfromthe
homescreenbypressingthe+key
for1second.
Select
fromthemenuwiththeJog
key.
Openthesettingscreenby
pressingtheJogkey.
(1second)
Callingthesettingscreen
P.MIX1 3(normaltype)
Thefollowingfunctionscanbesetforprogrammablemixing1to3:
【MixingChannel】
Usethisfunctionbychangingthechannelbecausethemasterchannelandslavechannelsinitialsettingisa
temporarycombination.
WhenOFSwasselectedasthemasterchannel,themixingratesettingappliestoslaveonly.Whenamixing
rateisset,slaveservooperationisoffsetbythatamount.
Aknob(VR)aswellasachannel,canbeselectedasthemasterchannel.
【Trimselection】
Whetherornotmixingincludesmasterchanneltrimoperationcanbeselected.
【Mixingreferencepointchange】
Themasterchannelmixingreferencepointcanbeshifted.
【Switchselection】
TheprogrammablemixingON/OFFswitchcanbeselected.TheswitchesthatcanbeselectedareswitchesAto
Handthethrottlestick.
Theswitchoperatingdirectioncanbeset.Whena2positionswitchwasselected,up/downcanbeset,and
whena3positionswitchwasselected,up/upanddown/up/andcenter/center/centeranddown/downcan
beselected.Whenthethrottlestickwasselected,theON/OFFpositionandoperationdirectioncanbeset.
When"NULL"isselected,mixingisalwaysON.
P.MIX4(curvetype)
Programmablemix4allowssettingofthemixingrateby5pointcurve.
OFSandknobuseandtrimselectionbynormaltypemasterchannelsettingdescribedaboveare
impossible,butswitchselectionispossible.
Mixing that can independently customize 4
functions can be used. Programmable mixing is
used to remove bad tendencies of the aircraft and

between arbitrary channels, this function includes
linking (linking with another mix), trim addition,
offset, and switch setting functions.
"P.MIX"
P.MIX
Programmixing
(Common)

Other manuals for FUTABA T6K

Related product manuals