FUTUR Trident Mini - Daily Cleaning & Maintenance

1. Do not clean ozone lter and composite hepa lter by water.
2. Caution should be taken when cleaning the machine, as strong
corrosive cleaners will damage the machine surface.
3. Only use soft cloth to clean the machine surface, otherwise it may
be damaged or broken, and may cause sensor failure.
4. Do not use alcohol or organic solvents to wipe the product, or it will
cause damage or electric shock,re, etc.
5. When cleaning or not using the machine, please unplug the power
from the socket, otherwise it may cause electric shock or re due to
short circuit.
1. The host cannot start if the front panel is not installed correctly.
2. Do not install near the sensors directly to the tuyere, otherwise it
may aect the normal operation of the machine.
3. Do not install near objects (such as curtains, etc.) that may contact
with the air inlet or outlet, otherwise the object may get contaminat-
ed or cause this unit to malfunction.
4. Do not install the unit where it may be directly exposed to conden-
sation. Please use it at room temperature of 0-40 degrees.
5. Do not install in the place that will produce black smoke (such as
kitchen, etc.), otherwise it may cause the machine surface to crack or
sensor failure.
1. There should be a certain space around the machine to let the air
ow naturally, so as to improve the purication eect.
2. This machine is not suitable for the disabled, the perceptual
disturbance, the mentally handicapped or children to operate
by themselves.
Clean the Top Outlet and Inlet Grille
1. Use a so brush to remove dust and debris.
2. If necessary, use a slightly wet paper or cloth to remove large
deposits, and do not use any irritang abrasives or cleaning
pads on any parts of the equipment.
Clean VOC Sensor
The VOC sensovr is located in the middle right side of the
machine, above the air inlet grille.
1. Use a so cloth to clean dust and debris around the
VOC sensor to maintain accurate smell idenfificaon.
2. Do not modify or open the VOC sensor, and do not spray in
or near the grille opening above the VOC sensor, which may
cause sensor and warranty failure.
DAILY CLEANING & MAINTENANCE
06
Noce for Cleaning
About Installaon
Warm Reminding