Futurecom DVRS - DVRS Status Display; Table 5 DVRS Status Display Messages; Icons

8A083X30 Rev.11
APX Series P25 Interface
DVRS User’s Guide
January 2019 Page 32 of 94
DVRS Status Display
The following MSU control head display Icons / messages relate to the DVRS operation:
O5 DISPLAY ICON /
MESSAGE
DVRS STATUS DESCRIPTION
Steady
V R
DVR is in a Primary State
Steady
Primary DVR Receiving
Steady
Primary DVR Transmitting
Steady
Primary DVR Receiving and Transmitting
Flashing
V R
DVR is in a Secondary State
Flashing
Secondary DVR Receiving
Steady
V R
DVR is in a Permanent Primary State
Flashing
V R
DVR is in a Permanent Primary on Standby (there is
another Permanent Primary already present in the area)
Flashing
Permanent Primary on Standby Receiving
Steady
Permanent Primary Receiving
Steady
Permanent Primary Transmitting
Steady
Permanent Primary Receiving and Transmitting
VR SERVICE
DVR is in Service Mode (during re-flashing of the
firmware).
VR ERROR
DVR detected error. Display toggles between VR ERROR
and the actual error code / number.
VR IN RESET
DVR is being reset
VR DISABLED
DVR Disabled on selected MSU TG / Mode
Table 5 DVRS Status Display Messages / Icons