8A083X30 Rev.11
APX Series P25 Interface
DVRS User’s Guide
January 2019 Page 69 of 94
Forced Analog All DVR Mode- Operation and Programming
Overview
Forced Analog All Mode is a hybrid mode in which the communications between the
DVRS and the ‘DVRS Enabled’ P25 PSU are P25 digital, while the voice
communications are ‘forced’ to be analog for all MSU channels. At all times the signaling
between the DVRS Enabled PSUs and the DVRS is digital P25. The DVRS must be on
a DVR channel programmed for ‘F.Analog All’ mode as described in the ‘Repeater
Channel Setup Menu’ section.
IMPORTANT!
Generic P25 PSUs cannot operate with a DVRS in Forced Analog All Mode.
IMPORTANT!
The PSU and DVR PL/DPLs must be programmed to be properly matched. The
DVRS Enabled PSU must be programmed for mixed receive in order to be able to
program PL on a ‘DVRS Enabled’ channel.
To Next Page
Loading...