Futurecom DVRS - Forced Analog Mode - Summary of Features; Forced Analog DVR Mode with Conventional Analog Mode Selected on MSU

8A083X30 Rev.11
APX Series P25 Interface
DVRS User’s Guide
January 2019 Page 70 of 94
Forced Analog Mode – Summary of Features
Forced Analog DVR Mode with Conventional Analog Mode Selected on
MSU
The operation described below assumes a DVR forced analog mode conventional
channel and conventional analog mode are selected on the DVR and MSU respectively.
This mode is supported on ‘DVRS Enabled’ PSUs ONLY.
FEATURE
DVR
OFF Mode
DVR
SYSTEM Mode
DVR
LOCAL Mode
DVRS Status Display on the MSU
CH
VR OFF <DVR CH>
VR SYS <DVR CH>
VR LOC <DVR CH>
PSU Affiliation
No
No
No
Talk Group Proxying
No
No
No
Outbound Group Call
No
Yes
Programmable
Outbound Private Call
No
No
No
MSU Microphone PTT
Keys up MSU only
As programmed
As programmed
Inbound Group Call
No
Yes
Yes (Local Side)
Inbound Private Call
No
No
No
Inbound Call Alert
No
No
Yes (Local Side)
PSU Talk Permit Tones
No
Yes
Yes
PSU Emergency Alarm
Yes (after activation)
Yes
Yes
PSU Emergency Revert via DVRS
No
Yes
Yes
PSU Emerg. ID Pass Through
No
Yes
Yes
PSU Remote DVRS Activation &
Steering
Yes – Call Alert
Yes – Call Alert
Yes – Call Alert
Failsoft / Out of Range / Site
Trunking Indication on PSU
NA
NA
NA
PSU Local Mode Indication
No
No
Yes
DVR Primary / Secondary Voting
No
Yes
Yes
DVR Tones – MSU Speaker
No
Yes
Yes
PSU Radio Check / Inhibit
No
No
No
PSU LOCATION
No
Yes
Yes
PSU P25 Trunking OTAR
NA
NA
NA
PSU Patch
NA
NA
NA
PSU Dynamic Regrouping
NA
NA
NA
PSU Selector Lock / Unlock
NA
NA
NA
PSU Phone Interconnect
NA
NA
NA
PSU Adaptive Power Control
No
No
No
Audio Buffering
No
Yes
Yes
PSU Scan
No
No
No
PSU Announcement Group
No
No
No
P25 Encryption
No
Programmable
Programmable
PSU Status / Message
No
Yes
Yes
PSU PTT ID
No
Locally only
Locally only