FutureLogic GEN2 - Printer Cleaning; Cleaning and Maintenance Dos and Donts; Required Cleaning Supplies

Printer Cleaning Guide
(GEN2™ and GEN2 Universal™ Printers)
 2010 FutureLogic, Incorporated. All Rights Reserved. PUBN Page 2 of 10 08/19/2010
MNL-000054 REV.X01
Routine Cleaning Method
Use these procedures for routine cleaning of the Paper Path.
1. Use compressed air to blow out any excessive dust
and dirt in the presenter compartment, including the
Presenter Rollers and Ticket Taken sensor, etc.
2. Position the compressed air nozzle within the
Paper Loading Slot to blow out any excessive dust
and dirt from the Paper Out (Black Index Mark)
sensor (not visible).
Use Com
p
ressed Ai
r
Pa
p
er Loadin
g
Slot
The position of the compressed air nozzle is
approximately 1 inch from the right side of printer.