Need help?Do you have a question about the FUWI Pellets Boilers and is the answer not in the manual?
User interface with keyboard and alphanumeric display.
Installed on DIN rail, connected to sensors and operator panel.
Controller manages mixing valves, adjusts heating medium temperature and protects against low return temperature.
Boiler automation can cooperate with any room thermostat with shorted terminals.
User sets boiler temperature manually via the Operational Panel.
Requires external sensors; temperature set by linear programmable heating curve.
Used for heating warm usable water; central heating pump does not start.
Crucial for efficient operation; time set based on boiler power and fuel type.
Affects fuel energy use and ecological burning; adjusted based on chimney draught.
Automatic reduction of burner power when set temperature is reached.
Includes operation mode, preset temperature, and hysteresis.
Covers calculated temperature, lowering, curve, and shift.
Includes preset temperature, priority, and hot service water settings.
Covers power, blower correction, preset oxygen, and fuel type.
Access by pressing ENTER; lists BOILER, BURNER, MEASUREMENTS, etc.
Used for adjusting parameters; increase/decrease values with specific buttons.
Indicates functions like CH pump, fuel feeder, blower, igniter, etc.
To Next Page
General