Original User Manual FUXTEC FX-WP series_en
11
fire risk but also environmental pollution. Wipe up spilt fuel immediately.
NOTE
Gasoline can damage paint and plastics. Take care not to spill gasoline when filling the
fuel tank. The warranty does not cover damage caused by fuel spillage.
FUEL AND 2-STROKE OIL
Use unleaded gasoline with 2-stroke engine oil in a 40:1 ratio. During the first few
operations, a mixing rate of 25:1 can be selected to lubricate all device parts optimally.
WARNING: Never use pure gasoline in your device. This will cause permanent engine
damage and voids the manufacturer's warranty for this product. Never use a fuel
mixture that has been stored for more than 90 days.
WARNING: It must be a first-class oil for 2-stroke air-cooled devices.
FUEL MIXTURE
Mix fuel with 2-stroke oil in a particular container. Please note
the mixture table on the following page for the correct ratio of fuel to oil. Shake the tank
to ensure complete mixing.
WARNING: Lack of lubrication excludes the liability of the device manufacturer.
Gasoline and oil must be mixed in a 40:1 ratio.
Recommended fuel
It is recommended to use unleaded gasoline with an octane number of 90 # or higher to
reduce carbon deposition in the combustion chamber. Do not use old or dirty gasoline.
Keep the fuel tank dust-free and avoid water getting into the tank. Sometimes overload
will cause misfiring, which is normal.
If the backfires are heard under the average load, we recommend changing the
gasoline. If the misfire is still present afterwards, please contact an authorized
workshop.
WARNING
Gasoline
Two-stroke engine oil
(40:1) Gasoline
Two-stroke engine oil
(40:1)
1 liter 0.025 liter 5 liter 0.125 liter
2 liter 0.050 liter 10 liter 0.250 liter
To Next Page
Loading...