EasyManua.ls Logo

FXA 501741206 - Safety Precautions During Use; Assembly; Unpacking and Handle Setup

FXA 501741206
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 6 -
- To remove and emptying the grass catcher.
- After hitting a foreign object, stop the engine and check thoroughly the mower in order to see if it
is damage. Bring the mower in an agreed service station to do the repairing if necessary.
WARNING: After you stopped the engine the blade is still in motion during a few seconds.
- If the mower vibrates in an abnormal way, find the reasons why, and take your mower to an
agreed service station.
- Check regularly that bolts, nuts and screw are secularly tightening for a safe use of the mower.
z GASOLINE IS HIGHLY INFLAMMABLE
- Keep gasoline in a jerry can specially made for this purpose.
- Fill up the tank with a funnel, do the operation outside. Do not smoke. Do not use mobile phone.
- Fill up with gasoline and oil before starting the engine. Never open the cap of the fuel tank to add
gasoline while the engine is running or still hot.
- Do not start the engine if there is some gasoline spread around, take the mower away from the
one where gasoline have been split and avoid any contact from a hot source as long as the split
gasoline is completely evaporated.
- Tighten the fuel tank cap and close tightly the jerry can cap.
2. ASSEMBLY
Unpacking
Remove the lawn mower from carton and check thoroughly for additional loose parts.
Handle setup
Step 1: Put the lower handle on the deck.
Step 2: Insert two bolts through two holes.

Related product manuals