EasyManua.ls Logo

FY-TECH FY-4200/2E - Safety Precautions; General Safety and Protective Measures; Electrical and Thermal Hazard Avoidance; Fire, Explosion, and Cylinder Safety

Default Icon
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Read instructions.
1Read owner's Manual before using or
servicing unit
2Use only manufacturer’s supplied
replacement
Exploding parts can injure.Always
wear a face shield and long sleeves
Static can damage PC boards
1Put on grounded wrist strap before
handing boards or parts
2Use proper static-proof bags and
boxes to storemove or ship PC boards
Fire or explosion hazard.
Do not locate unit on,over,or near combustibe
surfaces.Do not install unit near flammables.
1Wear approved face shield or safety
goggles with side shields
2Wear proper body protection to protect skin
Do not weld in the height
Flying metal can injure eyes
1)Wear safety glasses with side shields or
face shield
1Magnetic fields can affect pacemakers.
Pacemaker wearers keep away.
2Wearers should consult their doctor
before going near plasma arc cutting
operations
Overuse can cause overheating
Allow cooling period ,follow rated duty
cycle before starting to weld again.
Cylinders can explode if damaged.Gas
cylinders contain gas under high pressure.
If damaged,a cylinder can explode .Be sure
to treat them carefully.
Electric shock can kill:
1Do not touch live electrical parts
2Wear dry,hole-free insulating gloves
and body protection.
3Do not wrap electrical cable around your body.
4Ground the workpiece with a good elect-
rical ground
Keep away from the torch tip.
Remove all flammables of the welding area.
Falling unit can cause injury.
Eye protection for welding:
Current level in amperage Minimum shade
Number
30-150A---------------------------- #8
150-300A--------------------------- #10
300-500A--------------------------- #12
The heat from the workpiece can cause serious
burns
Never cut on pressurized cylinder.
Keep away from moving parts such as fans.
Fumes and gases can be hazardous.
welding produces fumes and gases. Breathing
these fumes and gases can be hazardous to
your health.
If inside,ventilate the area.
Do not weld in a confined space only if it
is well ventilated.
Moving parts can cause injury.
Maintenance regularly
Factory safety
Protect yourself
Warn others
Page.1
Safety Precautions Symbols
Protect yourself and others from injury,
read and follow these precautions before
installation and operation.