24
7.4 DIRECT MEMORIES:
A contact from the memory can be assigned to each of the 2-9 buttons.
Whit the handset in standby mode, you can then press and hold that but-
ton for at least 2 seconds to automatically dial the assigned number.
to assign a contact:
press 3x the button
use the and buttons to select the option
[ SNELKEUZ ]
press the
button
use the
and
buttons to select the desired button (2~9)
press the
button
[ LEEG ] will appear when no contact is yet assigned to
this button, otherwise the name of the assigned contact
will be shown
when [ LEEG ] contact already assigned
after a second or more the
rst contact in the memory
of your handset will appear,
now use the and but-
tons to select the desired
contact
See the next paragraph:
‘to assign, edit or delete’
3x
To Next Page
Loading...
