Fysic FX-6000 - 13 ADDITIONAL HANDSETS; 13.2 TO REGISTER HANDSETS

40
13 ADDITIONAL HANDSETS
13.1 INTRODUCTION:
You can connect 5 handsets with each base station from the FX-6000 /
FX-6020 series. This way you can make internal calls free of charge and
you can also transfer calls.
13.2 TO REGISTER HANDSETS:
Attention, the handset(s) supplied with the basis is (are) already registered
to that base. The following instructions are only valid for registering new
handsets or for re-registering handsets in case of a power outage.
base:
press and hold the base button for at least 8 seconds
handset:
press 2x the button
use the and buttons to select the option
[ REGISTR ]
press 2x the button
use the keypad to enter the PIN code
press the button, the handset will now start
searching for the base station
2x
8 sec